Purchase Handmade Bead Jewelry at:


Photography is an art that involves taking pictures or images with respect to good lighting. It is paramount to note that without good lighting, photography is almost impossible or even if done, might not come out good enough. With the above fact known, it shows that photography is a form of art made possible by light. To get a nice jewelry photograph, one must understand the concept of lighting in photography and its control.

Don’t attempt capturing the same light range on the digital back as seen by the eye. It’s a terrible error. The range you see is far broader than the amount of light the digital back will be able to capture. While the eye can see a wide range at the same time, digital chips cannot. The difference is that a digital chip can capture light all across the light spectrum, but not all at the same time like your eye can. Jewelry is often difficult to photograph because of its composition of highly polished materials or colored stones which can refract or reflect lights that are focused upon them. To achieve great results photographing jewelry, review the following tips.

Jewelry Photography Tips

  1. Jewelry appears sharp and crisp. Setting the camera to focus on the particular spot is better than making use of auto focus. This way, the spot of interest will be captured sharper than normal. However, the above method does not always work to capture a shiny object. A camera of manual focus capability may be needed and to also minimize blurry image of an object in motion, a tripod mount can be put in place to make the camera stable.



  1. The use of diffused natural light on jewelry photography to eliminate shadows and glares are not needed because jewelry surfaces can reflect most of the incident light. To solve this difficulty, illumination of jewelry with light bulbs from the right angles can be used.
  1. To photograph jewelry perfectly, put the camera’s Aperture at the highest number. Making the camera to focus on the entire jewelry object instead of focusing a particular part can maximize depth of field of the camera. This is a crucial point based on the closer you get to your object.
  1. Positioning jewelry is also important. Shaping a bracelet, chain or necklace on a white background brings out the jewelry’s prominent features. Make use of a wax stand when working with small items such as beads or rings. This will help your jewelry be at the right angle and might show more depth. Also, making sure the jewelry is free from impurities is important. Using these procedure will definitely improve your jewelry photography.

Below are further explanations on features of different lighting that can also improve photographing jewelry.


This is the simplest form of lighting for jewelry photography. This can be done when you place or position source of light around the camera lens opposite the jewelry you want to capture. It is achieved by placing the light source around the camera lens pointing towards the jewelry to be photographed. Front lighting has a two-dimensional, flat effect.


Side lighting gives the impression of three dimensions. From the sides, it illuminates the jewelry. Side lighting is important as it shows and accentuates the surface textures of jewelry.


Natural light completely surrounds an object. This lighting can be found everywhere, both indoor and outdoor locations without addition of any other form of artificial light. Natural light can be very useful and effective in photographing jewelry as it achieves a soft and pronounced appearance on metal and gemstones.


Setting up direct lighting results in high contrast, especially when it’s coming from a single source such as the Sun or a fixture equipped with a Fresnel lens. It guarantees pictures of high contrast with deep shadows. In jewelry photography, people use direct lighting with other light sources to enable them to produce a particular effect on the general capture, which is creative. Using high contrast lighting adds impact and accentuates jewelry textures.


Diffused lighting involves scattered light rays that can produce softer light, lessen contrast, and smooth out details in the jewelry. The outcome is that images captured seem dreamy and perhaps romantic in nature. This technique is wonderful to show details of shadow. It is the most widely used method in jewelry photography.


Spotlighting is so essential when one needs to focus on a particular area of the jewelry. However, in jewelry photography most surfaces are reflective; therefore special skills must be used when diffuse and control of reflection is the aim behind spotlighting. The end result can result in compelling and dramatic jewelry photography.

Purchase Handmade Bead Jewelry at: